Profile Rail C Struct Channel
Advantages of Zinc-Al-Mg Struct Channel and Solar Mounting Bracket：
1.Allows for quick, efficient, and cost-effective installation.
2.Adjustable post spacing to withstand varying wind and snow loads.
3.Made from high-quality Zinc Aluminum Magnesium materials.
4.Superior corrosion resistance due to advanced surface treatment.
5.All necessary screws and nuts included with each component.
6.Fasteners and rail nuts come fully pre-configured, reducing the need for additional parts.
7.Mechanical calculations and reliability tests conducted to ensure top product quality.
8.System and structural warranty ranging from 12 to 25 years.
| Raw Material: | Hot dipped steel/Zinc Al Mg Steel |
| Grade: | DX51D/S250GD/S350GD/S420GD |
| T-Wall Thickness(mm): | 1.5-3.0 |
| h(mm): | 21/41/52/62/72/82 |
| E(mm): | 10 |
| e(mm): | 7.5 |
| W(mm): | 41 |
Aplication: Photovoltaic Solar Mounting System
U-Shaped Bracket (Rail U or Special Profile C) for Solar Mounting：In solar mounting steel structures, the U-shaped bracket is often pre-punched. As a result, installers can make quick on-site adjustments without extra tools. They can change the length and height to meet project needs. Therefore, the bracket works well in different environments and under various conditions.
Advantages
Flexibility :Thanks to the pre-punched design, installers can adjust the bracket at the site based on actual needs. Moreover, this feature improves flexibility during installation.
Simplified Installation:It removes the need for on-site drilling. Consequently, installation time is shorter and overall efficiency increases.
Compatibility: The design supports various photovoltaic module sizes and different site layouts, which in turn improves system adaptability.
Precision:Pre-drilled holes ensure accurate positioning. This means greater stability and better long-term performance.
Fast Delivery:Standard thicknesses (1.8mm, 2.0mm, 2.5mm) and sizes (41×41mm, 41×52mm, 41×62mm) are in stock. In addition, with regular raw materials such as Zinc-Al-Mg Steel (S350GD+ZM275), we can prepare a 20GP container quickly. For example, keeping profile lengths under 5000mm helps speed up shipping.
Application Scenarios
Different Tilt Angles:Installers can adjust the tilt angle based on roof or ground conditions. This helps achieve maximum sunlight exposure.
Irregular Terrain:On sloped or uneven ground, both height and length can be adjusted so that photovoltaic panels remain level.
Multiple Environments:The bracket is suitable for roofs, open fields, sheds, and other settings. On the other hand, each location may require small adjustments for best results.
Installation Process
Site Survey:Measure the installation area and create a layout plan. After that, confirm all measurements.
Bracket Adjustment:Change the length and height according to the project design. In some cases, extra bracing may be added.
Secure the Support:Use pre-drilled holes and bolts to connect steel purlins, front and back steel columns, and beams (including sloped beams and diagonal bracing). This ensures strength and stability.
Panel Installation:Mount the photovoltaic panels on the support bracket. Finally, connect and test the system to confirm performance.